Helping Customers Innovate, Improve & Grow
| Product | Crystal Cut |
Frequency Range (MHz) |
Output Supply | Aging | Temperature Stabilities to –40°C to +85°C |
Features |
| OX-400 (formerly C4400)  13.2 x 20.8 x 10.2 mm DIP 14 |
AT | 10 to 160 | HCMOS, 3.3V & 5V |
< ± 300ppb/year < ± 2.5ppm/10years |
10ppb | - Exceptional Phase Noise performance at higher frequencies |
| SC | 10 to 52 | HCMOS, 3.3V & 5V |
< ± 100ppb/year < ± 700ppb/10years |
|||
| OX-200 (formerly C4550)  25.4 x 25.4 x 11.2 mm DIP 14 |
AT | 10 to 100 | HCMOS/Sinewave, 3.3V, 5V, 12V |
< ± 250ppb/year < ± 2.0ppm/10years |
10ppb | - Low Aging - Good Close in Phase Noise - -165 dBc/Hz Phase Noise Floor |
| SC | 10 to 100 | HCMOS/Sinewave, 3.3V, 5V, 12V |
< ± 100ppb/year < ± 500ppb/10years |
| Product | Frequency Range (MHz) |
Output Logic | Temperature Stabilities to –40°C to +85°C |
Features |
| VT-800 (formerly VTC4)  3.2 X 5 X 1.5 mm |
10 to 40 | Clipped Sinewave | - Tight Stability Reference clocks(CMOS & Clipped Sinewave) | |
| VT-700 (formerly VTC1)  5 X 7 X 2 mm |
10 to 40 | Clipped Sinewave, CMOS |
- Tight Stability Reference clocks(CMOS & Clipped Sinewave) | |
TX-508 9 X 14 mm SMD |
10 to 100 | HCMOS, LVCMOS |
±25.0ppm | - Low G-Sensitivity - High shock resistant - Vibration hardened - Random Vibration according to MIL-STD-202G; Method 214A; Condition II-D 0.1 g2/Hz / 30 grms |
| Product | Center Frequency (MHz) |
Bandwidth | Pass Band Ripple |
Insertion Loss |
Group Delay Ripple |
Features |
TFS1413 3.0 x 3.0 mm LCC |
1413.25 | 36.50 MHz | BWOP | 3.8 dB | 25 ns | - 50 Ohm - No Matching - Low Loss - Tight Transsition |
TFS2441A 3.0 x 3.0 mm LCC |
2441.75 | 83.5 MHz | BWOP | 6.5 dB | 5 ns | - Wide bandwidth - low Group Delay Ripple (GDR) |
TFS403A 3.8 x 3.8 mm LCC |
403.5 | 3.00 MHz | 1.5 dB | 5.5 dB | 100 ns | - Small Footprint Med IF - Great Rejection |
TFS611A 5.0 x 5.0 mm LCC |
611 | 6.00 MHz | 1.0 dB | 6.0 dB | 30 ns | - 75 Ohm system - Tight Transsition |
TFS433K 7.3 x 5.3 mm LCC |
433.42 | 0.15 MHz | 3.0 dB | 5.0 dB | 700 ns | - Narrow BW - Temp Stable - High Selectivity |
TFS210C 7.5 x 5.5 mm LCC |
210 | 8.2 MHz | 1.0 dB | 22.0 dB | 60 ns | - Great Ultimate Rejection and narrow bandwidth |
TFS210G 9.3 x 7.3 mm LCC |
210.82 | 1.60 MHz | 3.0 dB | 11.0 dB | 240 ns | - Temp Stable - Great Rejection |
| Product | Frequency Range (MHz) |
Output Logic | Features |
| VX-700 (formerly VC-710)  5 X 7 X 1.8 mm SMD |
80 to 200 | LVEPCL | - Discrete PLL VCXO with Jitter Performance less than 120fs rms jitter |
V-Type 5 X 7.5 X 1.8 mm SMD |
1 to 77.76 | TTL, CMOS |
- Discrete PLL's with Jitter Performance less than 120fs rms jitter |
VX-508 9 X 14 mm SMD |
10 to120 | HCMOS, LVCMOS |
- Low G-Sensitivity - High shock resistant - Vibration hardened - Random Vibration according to MIL-STD-202G; Method 214A; Condition II-D 0.1 g2/Hz / 30 grms |
| VX-501 (formerly C5310)  14.5 X 9.5 X 5.9 mm SMD |
1 to 700 | HCMOS, PECL, LVDS, LVPECL, Sinewave |
- FR4 based VCXO with exceptional in-close phase noise |
| Product | Frequency Range (MHz) |
Output Logic | Features |
VC-820 2.5 x 3.2 x 1.0 mm 4 PIN SMD |
.625 to 133 | CMOS | - Small Size - Fundamental Oscillator with Low Jitter Perform - CMOS Output XO |
| VCC6 (formerly VCC6-Q/R VCC6-L/V VCC6-107)  5 X 7 X 1.8 mm 6 PIN SMD |
10 to 312.50 | LVPECL, LVDS |
- Reference clocks with jitter <300 fs RMS |
PX-508 9 X 14 mm SMD |
10 to120 | HCMOS, LVCMOS |
- Low G-Sensitivity - High shock resistant - Vibration hardened - Random Vibration according to MIL-STD-202G; Method 214A; Condition II-D 0.1 g2/Hz / 30 grms |
| PS-702 (formerly SO-720)  5 X 7.5 X 2.0 mm 6 PIN SMD |
150 to 1000 | LVPECL, LVDS |
- Higher Frequency Reference clocks with jitter <100fs RMS |
| PX-501 (formerly C1310)  14.4 X 9.5 X 5.9mm SMD |
1 to 700 | HCMOS, PECL, LVDS, Sinewave |
- FR4 based XO with exceptional in-close phase noise |
