Helping Customers Innovate, Improve & Grow

WIRELESS

4G-LTE

The move to a dynamic IP based infrastructure will need a significant increase in backhaul capacity in order to deliver on the capabilities of its enhanced air interface and 100Mbps down and 50mbps up speeds. Advances in oscillator modeling will enable lower cost oscillators to be used to extend holdover performance and insure reliable performance. We continue to work closely with our customers to enhance the design of core timing, frequency and synchronization for emerging 4G applications.

Jump to product families shown below:
Modules   OCXO   TCXO   SAW Filter   VCSO   Frequency Translation   VCXO   STD XO  

Modules
Show All Module products >>
Product Features
MD-010
(formerly C6300)

- 1PPS Input Standard (10Mhz Optional)
- 1pps and 10MHz output signals standard
- Embedded SC Cut OCXO
- Serial communications interface standard
top of page
Show All OCXO products >>
Product Crystal
Cut
Frequency
Range
(MHz)
Output Supply Aging Temperature
Stabilities to
–40°C to +85°C
Features
OX-501
(formerly C4310 herm)

9.0 x 14.0 mm
AT 10 to 100 HCMOS,
3.3V
< ± 300ppb/year
< ± 2.5ppm/10years
30ppb - TCXO Replacement for Enhanced
  Performance
SC 10 to 52 HCMOS,
3.3V
< ± 100ppb/year
< ± 700ppb/10years
OX-400
(formerly C4400)

13.2 x 20.8 x 10.2 mm
DIP 14
AT 10 to 160 HCMOS,
3.3V & 5V
< ± 300ppb/year
< ± 2.5ppm/10years
10ppb - TCXO Replacement for enhanced
  performance
SC 10 to 52 HCMOS,
3.3V & 5V
< ± 100ppb/year
< ± 700ppb/10years
OX-300
(formerly C4500)

20.5 x 20.5 x 11.2 mm
DIP 14
AT 6 to 60 HCMOS,
3.3V, 5V, 12V
< ± 250ppb/year
< ± 2.0ppm/10years
5ppb - Low Aging
- Low Phase Noise
SC 6 to 60 HCMOS,
3.3V, 5V, 12V
< ± 75ppb/year
< ± 500ppm/10years
OX-220
(formerly C4530)

22.0 x 25.4 x 12.1 mm
DIP 14
AT 10 to 160 HCMOS/Sinewave,
3.3V, 5V, 12V
< ± 300ppb/year
< ± 2.5ppm/10years
5ppb - Low Aging
- Low Phase Noise
SC 10 to 40 HCMOS/Sinewave,
3.3V, 5V, 12V
< ± 100ppb/year
< ± 500ppb/10years
OX-200
(formerly C4550)

25.4 x 25.4 x 11.2 mm
DIP 14
AT 10 to 100 HCMOS/Sinewave,
3.3V, 5V, 12V
< ± 250ppb/year
< ± 2.0ppm/10years
10ppb - Low Aging
- Good Close in Phase Noise
- -165 dBc/Hz Phase Noise Floor
SC 10 to 100 HCMOS/Sinewave,
3.3V, 5V, 12V
< ± 100ppb/year
< ± 500ppb/10years
OX-170
(formerly C4600)

38.1 x 27.9 x 19.0 mm
Eurocase
AT 5 to 40 HCMOS/Sinewave,
3.3V, 5V, 12V
< ± 250ppb/year
< ± 2.0ppm/10years
5ppb - Low Aging
- Tight Close in Phase Noise
- -165 dBc/Hz Phase Noise Floor
SC 5 to 40 HCMOS/Sinewave,
3.3V, 5V, 12V
< ± 50ppb/year
< ± 500ppb/10years
DX-170
(formerly C4605)

38.1 x 27.9 x 19.0 mm
SC 5 to 20 HCMOS/Sinewave,
12V
<± 0.2ppb / day
<± 25ppb / year
0.2ppb - Smallest Double Oven in Eurocase Package
- Offering cxceptional holdover
  performance
- ADEV performance of 5 x 10-12 @ 1 second
DX-040
(formerly C4700)

50.8 x 50.8 x 25.4 mm
SC 4 to 15 HCMOS/Sinewave,
12V
< ± 10ppb/year
< ± 100ppb/10years
0.2ppb - 2" X 2" Double Oven
- Double Oven offering exceptional holdover
  performance
top of page
Show All TCXO products >>
Product Frequency
Range
(MHz)
Output Logic Temperature
Stabilities to
–40°C to +85°C
Features
TX-700
(formerly C2260)

5 X 7 X 3 mm
6.4 to 52Clipped Sinewave,
HCMOS
280ppb - SMD 5mm X 7mm TCXO
TX-500
(formerly C2310)

9.5 X 14.4 X 5.9 mm
6.4 to 800HCOMS,
Clipped Sinewave,
PECL,
LVDS
280ppb - High Frequency TCXO
- Wide Pull
TX-400
(formerly C2400)

13.1 X 20.7 X 7.5 mm
10 to 200HCMOS,
Sinewave
1.0ppm - Hermetic Seal
- Wide Frequency Range
- SMD Versions
TX-191
(formerly C2560)

29 X 25 X 10 mm
SMD
10 to 30HCMOS,
Sinewave,
PECL
1.0ppm - Low Aging
- Tight Stability
TX-080
(formerly TC-140)

38.9 x 38.9 x 13.5 mm
0.5 to 160TTL,
HCMOS,
Sinewave
1.0ppm - Low Phase Noise Performance
top of page
Show All SAW Filter products >>
Product Center
Frequency
(MHz)
Bandwidth Pass
Band
Ripple
Insertion
Loss
Group
Delay
Ripple
Features
TFS248M

3.8 x 3.8 mm
LCC
248.61.0 MHz BWOP 1.7 dB 8 ns - Very Low Loss
- very low GDR
TFS208B

9.0 x 5.0 mm
LCC
2080.80 MHz 1.0 dB 3.5 dB 8 ns - No Matching
- Low Loss
- low GDR
- high rejection
TFS211C

9.0 x 5.0 mm
LCC
2110.40 MHz 1.0 dB 8.0 dB 150 ns -Temp Stable
- Narrow BW
TFS248C

9.0 x 7.0 mm
LCC
248.65.00 MHz 0.5 dB 3.5 dB 10 ns - Low Loss superior stop band attenuation
TFS199D

13.0 x 6.0 mm
LCC
1990.20 MHz 0.5 dB 7.0 dB 200 ns - Narrow Bandwidth
- Temp Stable
TFS170N

13.3 x 6.5 mm
LCC
170.60.18 MHz 1.0 dB 8.0 dB 250 ns - High Power
- Temp Stable
- short impulse response
TFS199E

13.3 x 6.5 mm
LCC
1990.20 MHz 0.7 dB 7.0 dB 200 ns - Narrow Bandwidth
- Temp Stable
TFS248E

19.0 x 6.5 mm
LCC
248.6.2 MHz BWOP 6.0 dB 200 ns - Low Loss
- Temp Stable
- superior stop band attenuation
top of page
Show All VCSO products >>
Product Frequency
Range
(MHz)
Output Supply Features
VS-705

5 X 7.5 X 2.0 mm
6 PIN SMD
120-850LVPECL
LVDS,
Single Frequency
- Discrete PLL's with Jitter Performance less than; 120fs rms jitter
VS-702
(formerly VS-720)

5 X 7.5 X 2.0 mm
6 PIN SMD
150-1000LVPECL,
LVDS,
Single Frequency
- Discrete PLL VCXO with Jitter Performance less than 120fs rms jitter
top of page
Show All FX/CD/CS products >>
Product Input Logic
Supply
# of
Inputs
Input Freq.
(min/max)
Output Freq.
(min/max)
Output Logic # of
Outputs
Features
FX-501
(formerly C3310)

9.0 X 7.5 X 2.0 mm
14 PIN J-Lead
CMOS,Sinewave, 3.3V 1 2MHz to 100MHz 10MHz to 160MHz PECL,
Single Frequency,
LVPECL Single Frequency
1 - Phase Noise -90 dBc/Hz @ 10Hz Offset
FX-401
(formerly C3430)

13.7 X 20 X 5.1 mm
6 PIN SMD
HCMOS, PECL,LVDS, 3.3V or 5V 1 1MHz to 700MHz 10MHz to 700MHz LVPECL,
Dual Frequency
1 - Phase Noise -95 dBc/Hz @ 10Hz Offset
FX-402
(formerly FX-427)

13.7 X 20 X 5.1 mm
6 PIN SMD
CMOS, LVDS, LVPECL, 3.3V 4 8kHz to 200MHz 125MHz to 850MHz LVPECL,
Dual Frequency
2 - Drop in integrated Analog PLL for versatile
  frequency translation
top of page
Show All VCXO products >>
Product Frequency
Range
(MHz)
Output Logic Features
VX-700
(formerly VC-710)

5 X 7 X 1.8 mm
SMD
80 to 200LVEPCL - Discrete PLL VCXO with Jitter Performance less than 120fs rms jitter
VX-701
(formerly C5260)

5 X 7 X 2.3 mm
SMD
10 to 170CMOS,
TTL,
LVPECL
- SMD FR4 Based Package
- Low Phase Noise
- Tight Stabilities
VX-401
(formerly C5430)

13.0 X 19.9 X 5.9 mm
10 to 670CMOS,
PECL
 
VX-500
(formerly C5300)

14.2 X 9.14 X 3.68 mm
SMD
1 to 800CMOS,
TTL,
LVPECL
- 9x14 mm J Lead SMD
- High Frequency VCXO
VX-501
(formerly C5310)

14.5 X 9.5 X 5.9 mm
SMD
1 to 700HCMOS,
PECL,
LVDS,
LVPECL,
Sinewave
- Tight Stabilities
- High Frequency Outputs
- Low Phase Noise
top of page



NEW Parametric Search


Show All XO products >>
Product Frequency
Range
(MHz)
Output Logic Features
VC-820

2.5 x 3.2 x 1.0 mm
4 PIN SMD
.625 to 133CMOS - Small Size
- Fundamental Oscillator with Low Jitter Perform
- CMOS Output XO
VC-806

3.2 X 5 X 1.3 mm
6 PIN SMD
25 to 250 or
80 to 250
LVPECL,
LVDS
- Excellent Jitter and Phase Noise
- Compact Size
- RoHS Compliant
VC-801
(formerly VCC4)

5 X 3.2 X 1.3 mm
4 PIN SMD
1.544 to 125TTL,
CMOS
- Reference clocks with jitter <250 fs RMS
VCC1

5 X 7 X 1.8 mm
4 PIN SMD
1.544 to 190TTL,
CMOS
- Reference clocks with jitter <250 fs RMS
VCC6
(formerly VCC6-Q/R
VCC6-L/V
VCC6-107)

5 X 7 X 1.8 mm
6 PIN SMD
10 to 312.50LVPECL,
LVDS
- Reference clocks with jitter <300 fs RMS
PX-701
(formerly C1260)

5 X 7 X 2.3 mm
6 PIN SMD
1 to 175HCMOS,
LVPECL,
LVDS
- Reference clocks with jitter <250 fs RMS
- Good close in Phase Noise
PX-501
(formerly C1310)

14.4 X 9.5 X 5.9mm
SMD
1 to 700HCMOS,
PECL,
LVDS,
Sinewave
- Reference clocks with jitter <250 fs RMS
- Good close in Phase Noise
top of page